QUICK DRILL

New Line Drills with Side Lock Screw Mechanism to Significantly Improve Drilling Capabilities.

1. ISCAR introduces the new QUICKDRILL line with a combination of a unique clamping mechanism and robust tool structure that allows to drill under unfavorable conditions (cross holes, slanted entry/exit, chambers, etc.) without damaging the pocket.

2. This line was designed by utilizing highly advanced technologies, based on ISCAR’s successful SUMOCHAM drill families.

3. The starting diameter range is 12 to 19.5mm diameters, with drilling depth to diameter ratios of 3xD and 5xD.

4. A new drilling head with optimized geometry specially designed to withstand unfavorable conditions.

1. The new clamping mechanism enables convenient and fast head replacement without the need to remove the drill from the machine.

2. The pocket has been designed with an extremely robust structure. The cutting forces are distributed from the insert to the tool through the axial and radial surfaces (marked in blue), ensuring that the screw itself is not affected.

3. This design allows for an exceptionally high number of head replacements on a single body, even when drilling under unfavorable conditions and maintains high performance and repeatability results.

1. Extremely accurate position repeatability after each head change avoids the need for offset adjustment.

2. A special groove on the shank of the head for fixing the screw provides particularly tight contact, minimizing the head chattering in the pocket under unfavorable drilling conditions, increasing the number of head replacements on a single tool body.

3. The diameter range is from 12 to 19.5mm in 0.5mm increments.

Double margin system provides an additional support, which ensures high-quality holes with diameter accuracy of IT8-IT9 even in the unfavorable conditions.

Chamfered cutting corners guarantee reliable and prolonged tool life even in difficult machining applications.

The double-sided groove allows easy head insertion into the pocket.